Bio Cleaner Virus & Bacteria Cleaner & Sanitiser

£32.00£106.00

A super concentrated antimicrobial, antibacterial cleaner, derived from natural plant oils and environmentally friendly. Suitable for cleaning most textile surfaces in the home. Effective against many viruses, including Norovirus and Coronavirus, whilst being safe for use around children, pets and the elderly.  pH neutral and wool safe.

Dilution Ratio: 100:1

Use with our QAC Test Strips for effective measuring of product efficacy, see here.

At 100:1 dilution ratio this gives fantastic value, 1x5L will give you 500L of useable product.

Covid-19 is an illness caused by SARS-CoV-2, which is a Coronavirus. Coronaviruses have been around for a long time and belong to a group known as ‘enveloped viruses’. You can destroy the Coronavirus in the environment, but you cannot cure the illness once inside the human body. All of our anti-viral products contain our active ingredient which has been laboratory tested and proven effective against Coronavirus SARS-COV-2. There is some science behind how QAT based products such as ours combat enveloped viruses, we have made an easy-to-read leaflet about this, you can download a copy here.

Available in 1L & 5L

Looking for Case Rates for this product? Try here: Bio Cleaner Virus & Bacteria Eliminator – 4x5L Case Rate

 

Clear selection

Description

A super concentrate multi-surface cleaner and sanitiser will safely clean and protect the home by removing harmful bacteria, viruses and odours. Anti-Microbial, Anti-Bacterial, Anti-Viral and Anti-Fungal. Suitable for all wet cleanable surfaces and fabrics.

With a Log Kill of 6 – this means that our products kill 99.9999% of known microbes, plus leave a lasting layer of protection (subject to environmental factors.)

A multi-surface cleaner and sanitiser that will safely clean and protect by removing harmful bacteria, viruses and odours.

 

Suitable for all wet cleanable surfaces.

NON-HAZARDOUS IN DILUTION

BIODEGRADABLE

ALCOHOL AND BLEACH FREE

NON-FLAMMABLE

NEUTRAL PH

SUITABLE FOR BIO-HAZARD CONTROL FOGGING

PASSED & APPROVED TO EUROPEAN STANDARDS

ANTI-BACTERIAL EN1276 LOG KILL 6 = 99.9999%

ANTI-VIRAL EN14476 LOG KILL 4.33 = 99.99%

ANTI-FUNGAL EN1650 LOG KILL 6 = 99.9999%

 

FAST ACTING – KILLS BACTERIA AND VIRUSES WITHIN SECONDS

However, allowing to dwell, especially on fabrics & fibres ensures product is absorbed and fully effective (do not over wet.)

LONG LASTING RESIDUAL EFFICACY BUT WITH REAL WORLD ADVICE
The antimicrobial effects of Envirosafe can last weeks, however in high use areas where the surfaces are rubbed against and contamination is re-introduced, we advise a more realistic period of 24 hours.

FOOD SAFETY

Standard Envirosafe is not food safe – our NEW Envirosafe SF is fragrance free and ready to use, therefore safer for food and for use in food prep areas, however (again more real world advice) European regulations are extremely strict on the levels of disinfectant residue that can come into contact with food, which can easily be exceeded if too much product is applied – therefore we advise that surfaces which will come into direct contact with food are wiped with wet, disposable paper towels prior to food being prepared. (Interestingly, in the USA a level of 200ppm is safe according to their regulations, but even though we are Brexiting, the UK will still be following European regulations for the foreseeable future!)

INSTRUCTIONS FOR USE:

Not for use undiluted.

Use with our QAC Test Strips for effective measuring of product application: ensure test strip tip has absorbed applied product and take reading immediately – 200ppm+ is an effective level of sanitiser.

For all uses dilute 100:1 (10ml per 1L) Mix into fresh, clean water. Allowing product to dry after application ensures a protective residual layer. Once mixed it will last for months if free from cross contamination and kept from extremes of temperature and sunlight.

Carpet Cleaning: Use as a pre-spray, allow to dwell for 5 mins, agitate and extract as normal. May be used as a light post-spray for added protection, do not over-wet.

Hard Surface Cleaning: Clean surface and ensure free from dirt & debris. Spray onto surface and allow to dry. Can be wiped over with a disposable cloth/paper towel. Suitable for all wet-cleanable surfaces. May be misted over for added protection. After application of Envirosafe SF where food is to be prepared, wipe surface with a wet paper towel before direct food contact.

Fogging: Mix as directed above and follow machine instructions. Can be applied with an 01 jet using your existing spraying equipment. Check moisture has formed on surfaces to ensure adequate coverage. Use QAC Test Strips to check adequate application.

Not suitable for use in Hydro-Force inline sprayers or equipment that heats the product.

 

Looking for Case Rates for this product? Try here: Bio Cleaner Virus & Bacteria Cleaner & Sanitiser – 4x5L Case Rate

Download the MSDS:  Bio Cleaner – Neat or Bio Cleaner – Diluted

 

April 2020 EN14476 Virucidal Test Results:

 

SUITABLE FOR USE IN HOMES • DOCTORS’ SURGERIES • CARE HOMES • SCHOOLS • OFFICE BUILDINGS • ANY ENVIRONMENT REQUIRING MICROBIAL CONTROL

 

FAST ACTING – KILLS BACTERIA AND VIRUSES WITHIN SECONDS

However, allowing to dwell, especially on fabrics & fibres ensures product is absorbed and fully effective (do not over wet.)

LONG LASTING RESIDUAL EFFICACY BUT WITH REAL WORLD ADVICE
The antimicrobial effects of Envirosafe can last weeks, however in high use areas where the surfaces are rubbed against and contamination is re-introduced, we advise a more realistic period of 24 hours.

INSTRUCTIONS FOR USE:

Use with our QAC Test Strips for effective measuring of product application: ensure test strip tip has absorbed applied product and take reading immediately – 200ppm+ is an effective level of sanitiser.

For all uses dilute 100:1 (10ml per 1L) Mix into fresh, clean water. Allowing product to dry after application ensures a protective residual layer. Once mixed it will last for months if free from cross contamination and kept from extremes of temperature and sunlight.

Carpet Cleaning: Use as a pre-spray, allow to dwell for 5 mins, agitate and extract as normal. May be used as a light post-spray for added protection, do not over-wet.

Hard Surface Cleaning: Clean surface and ensure free from dirt & debris. Spray onto surface and allow to dry. Can be wiped over with a disposable cloth/paper towel. Suitable for all wet-cleanable surfaces. May be misted over for added protection. After application of Envirosafe SF where food is to be prepared, wipe surface with a wet paper towel before direct food contact.

Fogging: Mix as directed above and follow machine instructions. Can be applied with an 01 jet using your existing spraying equipment. Check moisture has formed on surfaces to ensure adequate coverage. Use QAC Test Strips to check adequate application.

Not suitable for use in Hydro-Force inline sprayers or equipment that heats the product.

 

QUALITY, PERFORMANCE AND HONESTY

 

Covid-19 is an illness caused by SARS-CoV-2, which is a Coronavirus. Coronaviruses have been around for a long time and belong to a group known as ‘enveloped viruses’. You can destroy the Coronavirus in the environment, but you cannot cure the illness once inside the human body. All of our anti-viral products contain our active ingredient which has been laboratory tested and proven effective against Coronavirus SARS-COV-2. There is some science behind how QAT based products such as ours combat enveloped viruses, we have made an easy-to-read leaflet about this, you can download a copy here.

 

 

Additional information

Weight 5 kg
Pack Size

1L, 5Lt

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.