Ceramic Sealer (un-glazed) allows the stone to breathe naturally and assists in keeping the surface, free from dirt and grease build up, making cleaning and maintenance considerable easier. For high gloss finish, apply Natural Stone Gloss.
Whether you’re a Professional or enthusiastic DIYer, you’ll be amazed at the ease of application and incredible speed of Ceramic Sealer (un-glazed) bonding to the stone in minutes. None of this standing around for hours waiting for the sealer to dry.
Using the latest Advanced Resin-Technology, Ceramic Sealer (un-glazed) contains a unique blend of Acrylic Resin and Co-polymers (that’s the techie stuff) to develop an incredible, bonded protective seal to the stone. A bond which is unique, strong and extremely durable.
You’ll find this amazing, protective and hard wearing, Ceramic Sealer (un-glazed) not only seals, it also enhances the natural colours in worn, dull or even rough textured tiles. It also allows the stone to breathe naturally, which assists greatly in keeping the surface, free from dirt and grease build up, making your daily cleaning and maintenance, practically effortless.
For high gloss finish, apply a minimum of 3-4 coats of Natural Stone Gloss.
COVERAGE: Approx. 10 sq mtrs per litre on highly absorbent stone and up to 20 sq mtrs on dense stone.
PRODUCT ADVICE: Not For Outside Use.
Ensure under floor heating is turned off and cooled prior to application to prevent premature drying. Test product for suitable colour change or enhancement on a spare tile or in an inconspicuous area.
DIRECTION FOR USE: Invert container before use – The surface to be treated must be clean, free from any residues, dust and dirt. If required, use Wax & Residue Remover prior to application.
Apply an even coat of 50-100ml per sq metre; 10-20 square metres per litre using natural pad applicator, sponge, mop or roller.
Allow to dry before applying a second or third coat. Ensure to apply in opposite directions. Wipe off any spills. Do not rush the application.
If air bubbles appear, remove by passing your applicator slowly over the areas affected.
DRYING TIME: May vary from floor to floor; product should be touch dry within 30 to 60 minutes in-between coats, and fully cured within 6-12 hours. Allow 6-12 hours before standing furniture back on the treated floor.
MAINTENANCE: To ensure the durability and “new look” of your floor, maintain on a daily basis using Professional Care & Maintainer.
Gloss finish maybe topped up by applying extra coats at regular intervals.
TECHNICAL ADVICE: For further product advice call free 0800 695 0825
For Nu-Life Stone Care restoration, cleaning and maintenance services call free 0800 695 0824 or visit www.nulifefloorcare.co.uk.
SAFETY PRECAUTIONS: Protective gloves should be worn when using this product. Avoid contact with eyes and skin. Use only in well ventilated areas.
For MSDS click HERE