ENVIROSAFE – virus & bacteria control
A multi-surface cleaner and sanitiser that will safely clean and protect by removing harmful bacteria, viruses and odours.
Suitable for all wet cleanable surfaces and fabrics.
NON-HAZARDOUS IN DILUTION
ALCOHOL AND BLEACH FREE
SUITABLE FOR BIO-HAZARD CONTROL FOGGING
PASSED & APPROVED TO EUROPEAN STANDARDS
ANTI-BACTERIAL EN1276 LOG KILL 6 = 99.9999%
ANTI-VIRAL EN14476 LOG KILL 4.33 = 99.99%
ANTI-FUNGAL EN1650 LOG KILL 6 = 99.9999%
New window/van stickers, free with any purchase of Envirosafe – just add a note with your order to say which you’d like: 17cm or 25cm, green or blue.
April 2020 EN14476 Virucidal Test Results:
SUITABLE FOR USE IN HOMES • DOCTORS’ SURGERIES • CARE HOMES • SCHOOLS • OFFICE BUILDINGS • ANY ENVIRONMENT REQUIRING MICROBIAL CONTROL
FAST ACTING – KILLS BACTERIA AND VIRUSES WITHIN SECONDS
However, allowing to dwell, especially on fabrics & fibres ensures product is absorbed and fully effective (do not over wet.)
LONG LASTING RESIDUAL EFFICACY BUT WITH REAL WORLD ADVICE
The antimicrobial effects of Envirosafe can last weeks, however in high use areas where the surfaces are rubbed against and contamination is re-introduced, we advise a more realistic period of 24 hours.
Standard Envirosafe is not food safe – our NEW Envirosafe SF is fragrance free and ready to use, therefore safer for food and for use in food prep areas, however (again more real world advice) European regulations are extremely strict on the levels of disinfectant residue that can come into contact with food, which can easily be exceeded if too much product is applied – therefore we advise that surfaces which will come into direct contact with food are wiped with wet, disposable paper towels prior to food being prepared. (Interestingly, in the USA a level of 200ppm is safe according to their regulations, but even though we are Brexiting, the UK will still be following European regulations for the foreseeable future!)
INSTRUCTIONS FOR USE:
Use with our QAC Test Strips for effective measuring of product application: ensure test strip tip has absorbed applied product and take reading immediately – 200ppm+ is an effective level of sanitiser.
For all uses dilute 10:1 (100ml per 1L) Mix into fresh, clean water. Allowing product to dry after application ensures a protective residual layer. Once mixed it will last for months if free from cross contamination and kept from extremes of temperature and sunlight.
Carpet Cleaning: Use as a pre-spray, allow to dwell for 5 mins, agitate and extract as normal. May be used as a light post-spray for added protection, do not over-wet.
Hard Surface Cleaning: Clean surface and ensure free from dirt & debris. Spray onto surface and allow to dry. Can be wiped over with a disposable cloth/paper towel. Suitable for all wet-cleanable surfaces. May be misted over for added protection. After application of Envirosafe SF where food is to be prepared, wipe surface with a wet paper towel before direct food contact.
Fogging: Mix as directed above and follow machine instructions. Can be applied with an 01 jet using your existing spraying equipment. Check moisture has formed on surfaces to ensure adequate coverage. Use QAC Test Strips to check adequate application.
Not suitable for use in Hydro-Force inline sprayers or equipment that heats the product.
QUALITY, PERFORMANCE AND HONESTY
Download the MSDS: Envirosafe
Download the New Information Leaflet: HERE
Covid-19 is an illness caused by SARS-CoV-2, which is a Coronavirus. Coronaviruses have been around for a long time and belong to a group known as ‘enveloped viruses’. It is worth noting that you cannot cure or kill Covid-19, you can destroy the Coronavirus in the environment, but you cannot cure the illness once inside the human body. (And despite what Trump suggests, you cannot put disinfectants inside the human body, this would be incredibly dangerous!)
There is some science behind how QAT based products such as ours combat enveloped viruses, we have made an easy-to-read leaflet about this, you can download a copy here.