Envirosafe: for flood restoration & multi-surface sanitising – 4x5L Case Rate

ENVIROSAFE: for flood restoration & multi-surface sanitising

A multi-surface cleaner and sanitiser that will safely clean and protect by removing harmful microbes and odours. Ideal for flood remediation work to sanitise areas and help prevent mould growth.

Suitable for all wet-cleanable surfaces and fabrics.

SUITABLE FOR FLOOR CLEANING & RESTORATION

ALCOHOL AND BLEACH FREE

NON-FLAMMABLE

NEUTRAL PH

SUITABLE FOR FOGGING

SUITABLE FOR USE IN HOMES • DOCTORS’ SURGERIES • CARE HOMES • SCHOOLS • OFFICE BUILDINGS • ANY ENVIRONMENT REQUIRING MICROBIAL CONTROL

FAST ACTING – KILLS BACTERIA AND VIRUSES WITHIN SECONDS

However, allowing to dwell, especially on fabrics & fibres, ensures product is absorbed and fully effective (do not over-wet.)

LONG LASTING RESIDUAL EFFICACY BUT WITH REAL WORLD ADVICE
The antimicrobial effects of Envirosafe can last weeks, however, in high-use areas where the surfaces are rubbed against and contamination is re-introduced, we advise a more realistic period of 24 hours.

FOOD SAFETY

Standard Envirosafe is not food safe – our Envirosafe SF is fragrance free and ready to use, therefore safer for food and for use in food prep areas.

INSTRUCTIONS FOR USE:

Use with our QAC Test Strips for effective measuring of product application: ensure test strip tip has absorbed applied product and take reading immediately – 200ppm+ is an effective level of sanitiser.

For all uses dilute 10:1 (100ml per 1L). Mix into fresh, clean water. Allowing product to dry after application ensures a protective residual layer. Once mixed it will last for months if free from cross-contamination and kept from extremes of temperature and sunlight.

Carpet Cleaning: Use as a pre-spray, allow to dwell for 5 minutes, agitate and extract as normal. May be used as a light post-spray for added protection. Do not over-wet.

Hard Surface Cleaning: Clean surface and ensure free from dirt & debris. Spray onto surface and allow to dry. Can be wiped over with a disposable cloth/paper towel. Suitable for all wet-cleanable surfaces. May be misted over for added protection.

Fogging: Mix as directed above and follow machine instructions. Can be applied with an 01 jet using your existing spraying equipment. Check moisture has formed on surfaces to ensure adequate coverage. Use QAC Test Strips to check adequate application.

May ONLY be used in Hydro-Force inline sprayers IF you only have clean water in your tank and it is not hot – mixing with other products or heat may affect the active ingredients of Envirosafe.

Not for use in thermal fogging machines or equipment that heats the product.