Sandstone and Limestone Sealer

£20.79£96.84

Contains a unique blend of Acrylic Resins and Co-polymers which bonds to the stone and applies a protective, hard wearing, extremely durable, natural finish that enhances colour within the stone.  Also provides excellent results on worn, dull or rough textured tiles, brick sets, clay and quarry tiles.

Clear selection

Description

Sandstone and Limestone Sealer contains a unique blend of Acrylic Resins and Co-polymers which bonds to the stone and applies a protective, hard wearing, extremely durable, natural finish that enhances colour within the stone.  Also provides excellent results on worn, dull or rough textured tiles, brick sets, clay and quarry tiles.

Whether you’re a Professional or enthusiastic DIYer, this enhanced Limestone & Sandstone Sealer makes it Fast, Easy and Safe for you to obtain an incredibly strong and durable seal to protect Limestone and Sandstone… Stronger than ever before!

Using the latest Advanced Resin-Technology, this incredible sealing product, contains a unique blend of Acrylic Resins and Co-polymers (that’s the techie bit) which bonds deeply into the stone.   Amazingly, at the same time, applying a protective, hard wearing, natural finish, that beautifully enhances the array of colours within the stone, keeping the surface, free from daily dirt and grease build up, making your daily cleaning and maintenance practically effortless.

Limestone & Sandstone Sealer also provides you with excellent results on worn, dull or rough textured tiles, brick sets, clay and quarry tiles.

  • Enhances Natural Colour
  • Extremely Durable & Hard Wearing
  • Makes Daily Cleaning Easier
  • Solvent Free
  • Contains Natural Plant Extracts
  • Fully Biodegradable Surfactants
  • New Advanced Resin-Technology,

COVERAGE:

Approx. 10 sq mtrs per litre on rough or highly absorbent stone.
Up to 25 sq mtrs per litre on less absorbent stone or stone

PRODUCT ADVICE:   Ensure under floor heating is turned off and allow floor to cool prior to application.   Test product for any colour change in an inconspicuous area before use.

____________________________________________________________________________________

DIRECTION FOR USE:   Invert container before use.

Ensure the area to be sealed is free from dirt, dust or grime.  Apply using natural pad applicator, sponge or mop or roller.

Apply an even coat of 40-100ml per sq metre; 10-25 square metres per litre, allow to dry before applying a second or third coat (approx 30 minutes), apply each coat in opposite directions. Wipe off any spills.

Do not rush the application or air bubbles may appear, ensure to pass applicator slowly back over covered area to remove air bubbles.

For a high gloss finish apply a minimum of 3 coats of Natural Stone Gloss.

____________________________________________________________________________________

DRYING TIME:
  May vary from floor to floor; product should be touch dry after 1 hour, and fully dry within 12 hours.  Allow 6-12 hours before standing furniture back on the treated floor.

MAINTENANCE:   Maintenance of your floors should be undertaken at regular intervals.   To maintain the surface sealer and finish, periodically apply 1-2 coats Limestone & Sandstone Sealer.

For daily or routine cleaning use Professional Care & Maintainer.   For higher levels of hygiene use Anti Bacterial Floor Cleaner

TECHNICAL ADVICE:   Not For Outside Use

 

SAFETY PRECAUTIONS:   Protective gloves should be worn when using this product, especially if skin is sensitive.   Avoid contact with eyes; Ensure all spills, and non treated areas are thoroughly rinsed with clean fresh water.

Additional information

Weight 5 kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.