Monster Honing Powder is a highly advanced and unique Marble Honing Powder. Expertly formulated to remove etching and lightly hone marble and limestone, providing a dull, honed finish and ready for polishing. Can be used on floors, worktops and walls etc.
Full training is recommended before using this product
Monster Honing Powder is a highly advanced and unique Marble Honing Powder. Expertly formulated to remove etching and lightly hone marble and limestone, providing a dull, honed finish and ready for polishing. Can be used on floors, worktops and walls etc
MPP is also specially formulated to Hone Marble, remove minor scratches and polish to an ultra high level, providing an unrivalled, natural reflective shine.
Monster Honing Powder is also effective on Terrazzo, travertine, Limstone and Agglomerated stones.
DO NOT USE ON: Granite, black or green marble as these can be sensitive and more challenging to polish
Directions For Use
Product is ready to use – Test an inconspicuos area for any adverse reaction. The areas to be restored need to be be totally free from wax coatings, sealers and be cleaned, neutralised and rinsed thoroughly.
Prior to polishing always apply Stain Gard SB
Step 1: Apply 10-15 gm of Monster Honing Powder to 1 square metre.
Step 2: Add a small amount of water to the floor and using a stone polishing machine (slow speed – min 40 kg) and a natural fibre pad, work the powder into the stone creating a thin slurry, polishing in small, circular motions to control the slurry. Ensure the powder does not dry out.
Step 3: Keeping the movable slurry wet, coninuously apply a small amount of water as needed (try to maintain a yogurt type consistancy throughout)
Step 4: Depending on the type of marble, it may take 3-5 minutes to produce the honed finish required. stop to check throughout the process. This process can be repeated if necessary.
Step 5: When the required finish has been achieved, remove the slurry and rinse the area using Natural Stone Cleaner. Dry and Buff
Step 6: If the floor is to be left in the honed condition – we recommend applying Stain Gard SB to provide strong, additional protection.
If polishing is required, polish using Monster Polishing Powder
Health & Safety
Wear suitable protective clothing, gloves and eye protection
Irritant: Irritating to eyes. In case of eye contact, rinse with pleanty of water and seek medical advice
Only use in a well ventilated area
Do not breathe mist or spray
Keep out of reach of children
Keep away from pets
Avoid contact with eyes and skin
Wash hands after use
If swallowed, DO NOT induce vomiting. seek medical advice immediately and show this container and label
Store in a cool, dry place – Do not freeze
Available in 5kg & 1kg tubs
For MSDS click HERE