Using the latest Advanced Resin-Technology™ and specifically formulated for stone only, Natural Stone Gloss contains a unique blend of Acrylic Resin and Co-polymers which bonds stronger than ever before, adding strength, durability and longevity. Incredibly, In the same process, it produces a Highly Protective, Hard Wearing and Extremely Durable, High Gloss Finish.
ty, Natural Stone Gloss is the product you’ve been searching for. This highly advance product, is Extremely Easy to Apply and unbelievably Fast Drying. Used extensively by professionals and DIY Perfectionists
Using the latest Advanced Resin-Technology, and specifically formulated for stone only, Natural Stone Gloss contains a unique blend of Acrylic Resin and Co-polymers which bonds stronger than ever before, adding strength, durability and longevity.
Incredibly, In the same process, it produces a Highly Protective, Hard Wearing and Extremely Durable, High Gloss Finish.
Please note: Only to be applied after Natural Stone Sealer and Professional Slate Sealer,
In addition, the special formula, allows the stone to breathe naturally, to help in keeping the surface, free from dirt and grease build up, making cleaning and maintenance considerably easier and faster. In fact, it’s a breeze!
Can also be used on Terrazzo, Travertine, Sandstone, Limestone and Brick sets, Quarry tiles, unpolished Marble and Granite.
COVERAGE: Approx. 20-30 sq mtrs per litre on stone pre treated with Natural Stone Sealer.
PRODUCT ADVICE: Ensure under floor heating is turned off and cooled prior to application to prevent premature drying. Test product for suitable colour change or enhancement on a spare tile or in an inconspicuous area.
DIRECTION FOR USE: Invert container before use. Ensure the area to be sealed is free from dirt, dust or grime.
Dependent on stone type, apply an even coat 30-50ml per sq metre; 20-30 square metres per litre, using natural pad applicator, sponge, mop or roller.
Allow to dry before applying a second or third coat. Ensure to apply in opposite directions. Wipe off any spills. Do not rush the application.
If air bubbles appear, remove by passing your applicator slowly over the areas affected.
For a deeper High Gloss finish, apply a fourth or fifth coat.
DRYING TIME: May vary from floor to floor; product should be touch dry within 30 to 60 minutes in-between coats, and fully cured within 6-12 hours.
Allow 6-12 hours before standing furniture back on the treated floor.
MAINTENANCE: To ensure the durability and “new look” of your floor, maintain on a daily basis using Professional Care & Maintainer. To maintain the gloss finish.
To maintain a high gloss finish, the floor should be spray burnished at regular intervals using Kleen & Buff LP. Re-apply Natural Stone Gloss as and when required.
SAFETY PRECAUTIONS: Protective gloves should be worn when using this product. Avoid contact with eyes; Ensure all spills and non treated areas are thoroughly rinsed with clean fresh water.
For MSDS click HERE