This Highly Advanced Professional Slate Sealer is for use on most Slate tiles, Riven, Rough and multi-coloured including Chinese, Indian and Welsh slate. Professional Slate Sealer bonds to the stone and applies a protective, hard wearing and extremely durable natural finish that enhances natural colours.
Fast, Easy and Safe to use, this Highly Advanced Professional Slate Sealer, is the Professional and DIY Perfectionists choice. You’ll be instantly Amazed at the speed of drying, protection unequalled durability and Longevity.
- Enhances Natural Colour
- Extremely Durable & Hard Wearing
- Makes Daily Cleaning Easier
- Solvent Free
- Contains Natural Plant Extracts
- Fully Biodegradable Surfactants
Professional Slate Sealer contains a unique blend of Acrylic polymers and Co-polymers. By using the latest Resin Technology™ it bonds to the stone and applies a protective, hard wearing and extremely durable natural sheen finish, which enhances worn, dull or rough textured tiles, greatly enriching the colour.
Professional Slate Sealer allows the stone to breathe naturally and assists in keeping the surface, free from dirt and grease build up, making cleaning and maintenance considerable easier.
For high gloss finish, apply Natural Stone Gloss.
COVERAGE: Approx. 10 sq mtrs per litre on highly absorbent slate; up to 20 sq mtrs on dense slate
PRODUCT ADVICE: Not For Outside Use
Ensure under floor heating is turned off and cooled prior to application to prevent premature drying. Test product for suitable colour change or enhancement on a spare tile or in an inconspicuous area.
DIRECTION FOR USE: Invert container before use – Use only in a well ventilated area. The surface to be treated must be clean, free from any residues, dust and dirt. If required, use Wax & Residue Remover prior to application.
Dependant on stone type; apply an even coat of 50-100ml per sq metre, using natural pad applicator, sponge, mop or roller.
Allow to dry before applying a second or third coat. Ensure to apply in opposite directions. Wipe off any spills. Do not rush the application as air bubbles may appear, remove by passing your applicator slowly over the areas affected.
For a high gloss finish apply a minimum of 3-4 coats of Natural Stone Gloss.
DRYING TIME: May vary from floor to floor; product should be touch dry within 30 to 60 minutes in-between coats, and fully cured within 6-12 hours. Allow 6-12 hours before standing furniture back on the treated floor.
MAINTENANCE: To ensure the durability and “new look” of your floor, maintain on a daily basis using Professional Care & Maintainer.
SAFETY PRECAUTIONS: Protective gloves should be worn when using this product. Avoid contact with eyes; Ensure all spills, and non treated areas are thoroughly rinsed with clean fresh water.