A water based impregnator for natural stone including Marble, Granite, Limestone, Travertine and all porous surfaces.
A water based impregnator which uses flurocarbon resins to produce high levels of stain resistance on all natural stone, including marble, granite and all porous surfaces. The impregnator fills the stone and coats it with an invisible film, making the stone virtually stain resistant by repelling both water and oil whilst still allowing the stone to breathe. For use on all natural stone, polished or unpolished. Particularly suitable for use in confined areas where it is not possible to use a solvent impregnator.
Directions For Use:
Ready to use. Test before use.
Keep working areas well ventilated.
Apply using an applicator sponge or roller, depending on the surface, and always apply a minimum of 2 coats. After initial application, leave until touch dry (approx 30-60 mins) before applying further coats.
For maximum protection, allow to dry for 5 hours or overnight.
May be polished if required, once completely dry.
Download the MSDS: Water Based Impregnator
Looking for Case Rates for this product? Try here: Water Based Impregnator – 4x5L Case Rate