Shop
Showing 1–36 of 381 results
1/4″ Male 1/4″ Compression Fitting
A 1/4" Male 1/4" Compression Fitting to connect the Solution Hose from the Valve to the Jet Holder at the bottom of the Wand.
1/4″ Male x 1/4″ Male Female 90 Degree Compact
1/4" Male x 1/4" Male Female 90 Degree Compact
2 Stage Vacuum Motor
2 stage 6.6" high airflow Lamb Vacuum Motor. Fits the Evolution machine.
2 Way Rocker Switch
2 Way Rocker Switch for changing over between the Heaters, Pumps or Vac's on a twin cable machine.
220psi Aquatec Pump
Solution Pump 220 PSI 3/8″ inlet & oulet ports – santoprene diaphragm, viton seals – 1.3 GPM open flow, 1.2 amp max – self priming – capable of being run dry – max liquid temp = 170 deg F – … Continued
3 Stage Vacuum Motor – 5.7″
3 stage Lamb Vacuum Motors come with inlet spigot.
5.2 Vac fits the Advantage and Advance machines.
3 Stage Vacuum Motor – 7.2″
3 stage Lamb Vacuum Motors come with inlet spigot.
7.2 Vac fits the Alltec, Professional plus, Ashcombe Elite machine.
3-Day Hands On Training Course – Including FREE First Year’s NCCA Membership!
NCCA Entry Level 3-Day Training Course
Special offer! Take this three day course at Alltec and receive your first year's NCCA membership* worth £270 absolutely free! The three days training consists of: Hands on Carpet Cleaning Hands on Upholstery Cleaning Hands on Spot & Stain Removal Please read below for full course & booking details. Booking T&C's can be found here.
360i Brush Head
The Carpet Brush Extraction Head has 3 stainless steel Swoop-Glide vacuum ports and 3 spray jets incorporated into a brush head to give the extra agitation needed to restore those super dirty commercial carpets.
360i Carpet Head
This head has three stainless steel Swoop Glide vacuum ports and 3 spray jets.
360i Tile & Vac Head
The Tile and Grout Cleaning Head is comprised of a rotary scrubbing brush with three straight down pressure wash spray jets to thoroughly clean the tile and the recessed grout lines.
38mm (1 1/2″) Hose Assembly
205 Bar (3000psi) solution hose and a vacuum hose - inc male & female connectors, end cuffs and joiners.
If you require different connectors please add a note during checkout.
38mm (1 1/2″) Vacuum Hose
With smooth free flowing bore inside, it allows high air movement and efficient vacuum.
3kw Heating Element IEC Type
3kw Heating Element for the Aqua range, Express and Elite machines, with the IEC type plug
3kw Heating Element with Round Plug
The 3kw Heating Element with Round Plug is used in the Professional Plus portable machine.
50mm (2″) Hose Assembly
205 Bar (3000psi) solution hose and a vacuum hose - inc male and female connectors, end cuffs and joiners.
If you require different connectors, please leave a note during checkout.
50mm (2″) Vacuum Hose
With smooth free flowing bore inside, it allows high air movement and efficient vacuum.
Select between 7.5m and 15m length.
6″ Wide Hand Tool
15cm (6") robust stainless steel hand tool. External spray jet. With a wider head to make cleaning with the hand tool quicker and easier.
75mm Front Double Castor
A durable 75mm Front Double Castor to fit the Alltec Professional Plus, Advantage and Advance portable machines.
Acid Rinse
A fibre and fabric acidic rinse. Apply during or after the cleaning operation to carpets or upholstery fabrics which are non colourfast or likely to give rise to browning problems. Works by neutralising any alkaline pre-sprays or detergents used which, if left in the fibres, may cause colour migration, resoiling, etc.
Acid Rinse Concentrate
Works the same as the Acid Rinse but in powder concentrate form.
Advance 1200
The Advance 1200 has been designed to be one of the most powerful portable hard floor cleaning machines, with the power and performance to blast the dirtiest tile or stone floors. Plus with it’s variable pressure controls, you can still clean carpets and upholstery, making this a powerful all-round super machine!
For full details, see further down page.
Interested in lease purchase? Your machine could cost you as little as £108 a month! Have a look at our leasing options here.
Advance 600 (Twin or Triple Vac)
Our best-selling machine, the Alltec Advance 600 is an exceptionally powerful, large capacity, professional carpet & upholstery cleaning machine. With adjustable 600psi pump, high air-flow, twin vac 5.7 vacuum motors as standard, optional triple vac upgrade, in-tank heater as standard, and large capacity tanks - all makes light work of both domestic and commercial cleaning.
For full details, see further down page.
Interested in lease purchase? Your machine could cost you as little as £84 a month! Have a look at our leasing options here.
Advance Waste Tank Lid Seals
Advance Waste Tank Lid for the Alltec Advance Machine.
Advanced Spot and Stain Removal
The Advanced Spot and Stain Removal is a great hands-on school and a must for any professional carpet cleaner.
This 1 day school is hands-on.
The day will start at 9.00am and finish approx. 5.00pm.
We will provide lunch and refreshments throughout the day.
All materials needed for the school will be provided for you, make sure you wear 'work clothes'.
Please select from the drop down list below the date you would like to attend.
Please read below for full course details.
Booking T&C's can be found here.
Advanced Spot Remover
A handy aerosol solvent based spot remover, similar to Dry Cleaning Solvent. 100% safe on all fabrics and carpet fibres (except bitumen backed carpet tiles etc). Excellent for removing spots and marks, oil, grease, tar, polish and some glues in smaller areas.