HOSE
Showing all 9 resultsSorted by popularity
Orion Sprayers Spare Parts
Spares for the Orion Sprayers (and seal kit for the Budget Xi sprayer)
O Ring Seal Kit - Orion and Xi6 models
Trigger Assembly with gauge
50cm Lance
Hose Assembly
Pump Assembly
End Nozzle Assembly
Fan Tip Nozzle Pack: sizes 8001/8002/8003
Goodyear Neptune 3000 High Pressure Solution Hose (with couplings)
Goodyear Neptune 3000 Solution Hose - the very best quality hoses on the market!
Goodyear Neptune 300 solution hose is the highest quality hose available on the market, particularly suitable for portable or truckmounted professional carpet and floor cleaning machines. The Neptune 3000 hose has a pressure rating of 3000psi and a temperature rating of -20 °F to 250 °F, is made of oil-resistant Nitrile synthetic rubber, RMA Class B, with Braided steel wire reinforcement. Non-marking durable and ultra flexible.
Fitted with a protective sleeve on either end to help protect against damage from bending.
Suitable for both Portable Machines and Truckmounts.
51mm/2″ Internal Vacuum Hose
51mm/2" Clear Internal Vacuum Hose
Order per Meter and we will send a single piece of the full length.
Sturdy, reinforced vacuum hose for use in our hot water extraction machines
Pump Priming Hose
Why exactly do you use a pump priming hose?!
Air can settle in your pump, running a pump with air still inside will cause low pressure output and possibly cause cavitation damage (where air bubbles literally eat away at the pump.)
Pump impeller cavitation.
Before every use it is advisable to prime the pump to remove any air.
In order to do this the water pump requires an unrestricted flow of water to effectively remove air from the system, using a priming hose will help to facilitate this. (Note - using a hose with a jet will not work, the jets will restrict the water flow.)
An Alltec Pump Priming Hose will enable you to prime your pump before every use, helping to keep your pump (and machine) in good working condition.
Available with either Male or Female solution coupling.
Instructions:
Put clean, fresh water in the solution tank. Plug the cables into the mains supply and connect the priming hose to the machine.
Turn on the pump whilst holding the hose over the solution tank, once you have a steady flow of the fresh water then turn the pump off.
Connect the solution hose to the brass coupling on the front of the machine and the vacuum hose to the vacuum inlet - then the other end to your floor wand or hand tool.
Turn on pump, then turn on vacs one at a time, you are now ready to start cleaning.
You can watch our Pump Priming tutorial HERE.
Pump impeller cavitation.
Before every use it is advisable to prime the pump to remove any air.
In order to do this the water pump requires an unrestricted flow of water to effectively remove air from the system, using a priming hose will help to facilitate this. (Note - using a hose with a jet will not work, the jets will restrict the water flow.)
An Alltec Pump Priming Hose will enable you to prime your pump before every use, helping to keep your pump (and machine) in good working condition.
Available with either Male or Female solution coupling.
Instructions:
Put clean, fresh water in the solution tank. Plug the cables into the mains supply and connect the priming hose to the machine.
Turn on the pump whilst holding the hose over the solution tank, once you have a steady flow of the fresh water then turn the pump off.
Connect the solution hose to the brass coupling on the front of the machine and the vacuum hose to the vacuum inlet - then the other end to your floor wand or hand tool.
Turn on pump, then turn on vacs one at a time, you are now ready to start cleaning.
You can watch our Pump Priming tutorial HERE. 
38mm/1.5inch Complete Hose Assembly (Solution & Vacuum)
High pressure 3000psi Goodyear solution hose and high quality 38mm/1.5 inch G-Vac vacuum hose – choose which connectors and joiners you need.
We only sell the very best quality hoses;
G-Vac Carpet Cleaning Vacuum Hose is the most versatile heavy duty vacuum hose found on the market today.
Featuring both a smooth inner and outer wall, eliminates corner/crevice hang-ups while optimising flow performance. Made from a Proprietary Polypropylene resin blend for optimal service life and temperature resistance, the G-Vac also offers superior crush and abrasion resistance while minimising long-term material deterioration, along with superior heat and chemical resistance. With an extremely high strength-to-weight ratio, the G-Vac is the best selection for applications that experience continuous high volume and high temperature use with commercial cleaning environments.
Goodyear Neptune 3000 Solution Hose - the very best quality hoses on the market!
Goodyear Neptune 300 solution hose is the highest quality hose available on the market, particularly suitable for portable or truckmounted professional carpet and floor cleaning machines. The Neptune 3000 hose has a pressure rating of 3000psi and a temperature rating of -20 °F to 250 °F, is made of oil-resistant Nitrile synthetic rubber, RMA Class B, with Braided steel wire reinforcement. Non-marking durable and ultra flexible.
Fitted with a protective sleeve on either end to help protect against damage from bending.
If you require a made-to-order length please contact us.
50mm/2 inch Vacuum Hose
50mm/2inch Vacuum hose with cuffs.
We only sell the very best quality hoses;
G-Vac Carpet Cleaning Vacuum Hose is the most versatile heavy duty vacuum hose found on the market today.
Featuring both a smooth inner and outer wall, eliminates corner/crevice hang-ups while optimising flow performance. Made from a Proprietary Polypropylene resin blend for optimal service life and temperature resistance, the G-Vac also offers superior crush and abrasion resistance while minimising long-term material deterioration, along with superior heat and chemical resistance. With an extremely high strength-to-weight ratio, the G-Vac is the best selection for applications that experience continuous high volume and high temperature use with commercial cleaning environments.
Choose your joiners/connectors below.
50mm/2inch Complete Hose Assembly (Solution & Vacuum)
High pressure 3000psi Goodyear solution hose and high quality 50mm/2inch G-Vac vacuum hose - choose which connectors and joiners you need.
We only sell the very best quality hoses;
G-Vac Carpet Cleaning Vacuum Hose is the most versatile heavy duty vacuum hose found on the market today.
Featuring both a smooth inner and outer wall, eliminates corner/crevice hang-ups while optimising flow performance. Made from a Proprietary Polypropylene resin blend for optimal service life and temperature resistance, the G-Vac also offers superior crush and abrasion resistance while minimising long-term material deterioration, along with superior heat and chemical resistance. With an extremely high strength-to-weight ratio, the G-Vac is the best selection for applications that experience continuous high volume and high temperature use with commercial cleaning environments.
Goodyear Neptune 3000 Solution Hose - the very best quality hoses on the market!
Goodyear Neptune 300 solution hose is the highest quality hose available on the market, particularly suitable for portable or truckmounted professional carpet and floor cleaning machines. The Neptune 3000 hose has a pressure rating of 3000psi and a temperature rating of -20 °F to 250 °F, is made of oil-resistant Nitrile synthetic rubber, RMA Class B, with Braided steel wire reinforcement. Non-marking durable and ultra flexible.
Fitted with a protective sleeve on either end to help protect against damage from bending.
If you require a made-to-order length please contact us.
38mm/1.5 inch Vacuum Hose
38mm/1.5inch Vacuum hose with cuffs.
We only sell the very best quality hoses;
G-Vac Carpet Cleaning Vacuum Hose is the most versatile heavy duty vacuum hose found on the market today.
Featuring both a smooth inner and outer wall, eliminates corner/crevice hang-ups while optimising flow performance. Made from a Proprietary Polypropylene resin blend for optimal service life and temperature resistance, the G-Vac also offers superior crush and abrasion resistance while minimising long-term material deterioration, along with superior heat and chemical resistance. With an extremely high strength-to-weight ratio, the G-Vac is the best selection for applications that experience continuous high volume and high temperature use with commercial cleaning environments.
Choose your connectors/joiners below.