Showing all 2 results
not rated £116.68 Add to basket
Hydroforce – Hydro-Filter In-Line Waste Filter
The advanced polymer is designed to withstand impacts and high temperatures and allows you to impress your customers by showing them how much soil is being removed, something not possible with opaque filters. The stainless steel filter protects your vacuum motor from harmful debris and maximises your machines CFM output. Additionally, the screw on lid eliminates broken latches so you can focus on your work, not on repairs. Includes outer housing and mesh filter.
not rated £175.00 – £181.34 Select options
Hydroforce In-Line Sprayer (AS08)
The Hydro-Force Injection Sprayer is based upon an injection system that consists of a specially designed valve that injects a concentrated chemical into the high-pressure water flow from the machine. Hydro-Force is designed for use with incoming water pressure of 400 PSI. The water flow is automatically reduced as it passes through the injector valve, thus reducing the pressure approximately 64%. To obtain the actual working pressure of your Hydro-Force Injection Sprayer, multiply your incoming pressure by 36%. The Hydro-Force Injection Sprayer is factory set to inject chemicals at a 1 to 8 ratio. Other chemicals may be used but should be prepared for a 1 to 8 dilution. The Hydro-Force pressure can be increased by putting a smaller jet at the end of the wand. This will, however, decrease the injection rate of your chemical. Your injection ratio may also change depending on the viscosity (thickness) of your chemical concentrate. The 1 to 8 ratio is based upon chemicals with a similar viscosity to water. The injection ratio can also be slightly affected by your main flow water temperature. This is generally not enough of a change to appreciably change the effectiveness of your system. We do, however, recommend the water temperature be kept below 200 degrees Fahrenheit, as higher temperatures can cause problems on the injection. Supplied with either male or female solution coupling.